BMSO-320 LH NC

Bandsawing Machine

Product Description

Fully automatic band saws for cutting solid stocks,tubes and profiles of steel , cast-iron light and nonferrous material.Only 90 deg. cut.Complate steel fabricated.Reductioned gear in oil bath and 5 different speed adjusted by a stepped pulley, carbide pads and rollers in the blade guides.The front jaw contains of a number of hardened rollers driven through a worm and wheel by an electric motor.The rear vice consist of a number of free running rollers.A limit switch assemebled on top the vice stops the machine when the block is exhausted. Once the work piece clamped between the rollers no further clampings needed. The work is fed through the vice to the bar stop which contains a micro-switch controlling the bar feed motor. A piece counter controls the number of the cuts.The machines stop automatically at the blade breakage. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. Bi-Metal sawblade and 1,2 meter infeed roller table are supplied as standart.



Technical Details



PARAMETER UNIT UNIT
Round Cutting Capacity mm 320
Flat Cutting Capacity mm 610 x 310
Square Cutting Capacity mm 320
Main Drive Motor kW 2,2
Hydraulic Motor kW 1,1
Coolant Pump kW 0,12
Cutting Speeds m/min. 20 - 100
Band Dimensions mm 4160x34x1,1
Working Height mm 640
Weight kg 1585
Lenght mm 2100
Width mm 1850
Height mm 1250