BMSO-320GH NC

Bandsawing Machine

Product Description

These are automatic bandsaw for straight and mitre cuts and miter cuts from 30 degrees to 90 degrees. Each machine has two hydraulic vises: one is a fixed vise and is located close the saw blade; the other is mounted on a movable carriage with a range of 500 mm. Material to be cut is by the vise mounted on the carriage. The PLC (Programmable Logic Control) is made by Telemecanique and provides for up to 10 different cutting programs, including cut length and number of pieces to be cut. With this system, the machine can be programmed for the next schedule even while carrying out the current programm. Accrancy of cut length is assured by means of a Newall magnetic measuring scale, which is impervious to dirt, oil,grease , chips and the like. The center of mitre rotation is intersection of the saw blade and the fixed vise jaw; and this insures that there is no change at different angular position.



Technical Details



PARAMETER UNIT UNIT
Round Cutting Capacity mm 320
Flat Cutting Capacity mm 350 x 320
Square Cutting Capacity mm 320
-75° Round Cutting Capacity mm 320
-75° Flat Cutting Capacity mm 350 x 200
-75° Square Cutting Capacity mm 300
-60° Round Cutting Capacity mm 300
-60° Flat Cutting Capacity mm 300 x 200
-60° Square Cutting Capacity mm 250
-45 Round Cutting Capacity mm 260
-45° Flat Cutting Capacity mm 250 x 180
45° Square Cutting Capacity mm 180
-30° Round Cutting Capacity mm 160
-30° Flat Cutting Capacity mm 150 x 150
-30° Square Cutting Capacity mm 150
Main Drive Motor kW 2,2
Hydraulic Motor kW 1,1
Coolant Pump kW 0,12
Cutting Speeds m/min. 20 - 100
Band Dimensions mm 3660x27x0,9
Working Height mm 740
Weight kg 1660
Lenght mm 2100
Width mm 2200
Height mm 1500