Mass production in continuous operation is done by OPUS 300 when producing cut-off pieces of steel and non-ferrous metals with a material cross-section up to a diameter of 300 mm. OPUS 300 is designed to be used with TCT circular saw blade in order to cut solid bars in high speed and excellent precise. With the Standard 600mm stroke servo feeding and 6 meters automatic loader. BMDO 150 XS is perfect for large-scale production of solid bars.
|
|
 |
 |
 |
|
| Cutting Capacity |
0° |
70-300 mm |
|
240 x 240 mm |
|
| Main Drive Motor |
37 kW |
| Hydraulic Motor |
2,2 kW |
| Coolant Pump |
0,2 kW |
| Feeder Servo Motor |
2 kW |
| Head Servo Motor |
5,5 kW |
| Chip Conveyor Motor |
0,25 kW |
| Material Loading Capacity |
6000 x 300 mm X 5 Bars |
| Automatic Loader Dimensions |
6150 x 2600 x 1900 mm |
| Blade Dimensions |
Ø900 X 3,6T X 4,2T |
| Blade Bore |
80 mm |
| Pin Holes |
4/27/120 2/12/64 2/15/80 |
| Saw Blade Speed |
50-240 m/min |
| Power Supply Voltage |
Ac400V, 3 Ph, 50/60 Hz |
| Power Requirement |
47,15 kW |
| Air Pressure |
5 bar / 0,5 mPa |
| Air Flow Rate |
245 lt/dk |
| Hydraulic Tank Capacity |
70 lt |
| Oil Mist Tank Capacity |
1,5 lt |
| Index Mechanism |
Servo Sürücü |
| Material Index |
AC Servo Motor & Vidalı Mil |
| Stroke |
750 mm |
| Feeding Length |
10-9999 mm |
| Feeding Speed |
0-750 mm/s |
| Minimumend Trimming Length |
10 mm |
| Remnant Length |
85 mm |
| Table Height |
940 mm |
| Machine Dimensions (W x L x H) |
4100 x 2300 x 3500 mm |
| Machine Weight |
10000 kg |
- Air Filter
- 6 mt Automatic Material Stand
